FLASH PROGRAM TO TOOLSTICK

To program the TOOLSTICK first connect the USB adapter

and connect the kit at the back of the USB adapter

HOW I FLASH PROGRAM TO TOOLSTICK

Firstly, i open the code that i want to burn

Second, focus on the top icon

the USB must detect the KIT before we can flash the program. If the program detect on my computer,
Before i flash the program WE MUST click this icon first,

Then, click on the second icon to transfer the code to TOOLSTICK

After FINISH the flash..DISCONNECT the USB and PLUG the USB adapter back in to receive the POWER.

PS;/ IF you miss to CLICK the HAMMER ICON , the toolstick will HAVE PROBLEM to understand the program. 

EXAMPLE FOR FIRST TRY WITHOUT CLICK THE HAMMER ICON